Sensor _ Passive Infrared Sensor

The Elmos PIR ICs are specially designed for energy-optimized and reliable operation.
The ICs have very low power consumption, are extremely low-noise and immune to high frequency interferences.
Part-No./Function Interface FlexRayTM Standard Recommended IMAX Efficiency Output Range Transducer frequency Driver output Memory Detection Sensitivity Bandwidth VBAT VOUT VSUPPLY Protection ISUPPLY IPEAK IMAX DC P(Motor) peak P(Motor)max VDD VER Iq RDSON ESD (kV) Bitrate Cranking Support High-Side Driven Low-Side Driven Bi-Stabil Included µC Feed-Back Inputs Package Status Comment
E910.97
Integrated Circuit for Smart PIR Detectors

PIR Signal, digital

2.7V to 3.6V 15µA

Wafer B

  • Outputs for Motion Detect
  • Insensitive to RF interference
  • Inputs for sensitivity and on time
E931.06
Single Channel PIR Signal Processor

PIR Signal and
Temperature (DOCI™)

2.7V to 3.6V 15µA

Wafer B

  • Digital Signal Processing
  • Single Wire Interface(DOCI™)
E931.62
Dual Channel PIR Signal Processor

PIR Signal and
Temperature (DOCI™)

2.7V to 3.6V 15µA

Wafer B

  • Dual Channel
  • Digital Signal Processing
  • Single Wire Interface(DOCI™)
E931.95
PIR Controller Integrated Circuit

Motion DETECT,
Threshold

2.7V to 3.6V 12µA

SOIC14N
TSSOP14
Wafer B

  • Outputs for Relay and LED
  • Insensitive to RF interference
  • Instanteous settling after power up
E931.96
Ultra-Low Power PIR Controller Integrated Circuit

Motion DETECT, Supply voltage for PIR Detector

2.7V to 3.6V 5µA

SOIC8
Wafer B

  • Ultra Low Power consumption
  • Excellent power supply rejection
  • Programmable detection criteria and operating modes
    E931.97
    PIR Controller Integrated Circuit

    Motion DETECT,
    Threshold

    2.7V to 3.6V 12µA

    SOIC14N
    TSSOP14
    Wafer B

    • Outputs for Relay and LED
    • Insensitive to RF interference
    • Instanteous settling after power up
    E931.98
    PIR Controller IC for Load Switch

    Motion DETECT,
    Threshold

    2.7V to 3.6V 70µA

    SOIC14N
    TSSOP14

    • Insensitive to RF interference
    • Instanteous settling after power up
    • Adaptive mains zero cross switching