The Elmos DC Motor control ICs are the perfect match for various applications. All DC Motor driver ICs are designed for energy saving, high performance and great quality. Extensive diagnostic functions ensure a high level of reliability - integrated functions include: Protection against overcurrent (with programmable threshold), temperature, over and under voltage, short circuit (with programmable threshold) and supply voltage.
Part-No. / Function Interface VSUPPLY IPEAK IMAX DC P(Motor) max RDSON Package Comment
E523.03, E523.04, E523.13, E523.14 (*SBC)
DC Motor LS FET Driver (LIN/PWM Interface)
  • LIN 2.x (1.3) or
    SAE-J2602
    (only E523.03/13) or
    PWM bidirectional
  • SPI for configuration

7V to 28V (5V to 42V)

±400mA

±75mA

≈1.5kW
(external FETs)
≈1.3W
(direct drive)

8Ω (HS)

4Ω (LS)

QFN20L4
QFN32L5 (with high voltage spacer)

  • Voltage Regulator
    E523.03/13: 5V | E523.04/14: 3.3V
  • Watchdog/Diagnostics
  • Fast LIN Flash update
  • TJunc peak = +170°C
E523.05 (*SoC / *Plug & Play)
DC 2x Half-Bridge Controller with 16bit CPU (LIN / PWM Interface)
  • LIN 2.x (1.3 comp.),
    SAE-J2602 or
    PWM bidirectional
  • SPI for configuration
  • LIN Flash update
  • JTAG

7V to 28V (5V to 42V)

6x ±400mA

6x ±75mA

≈1.5kW

(external FETs)

≈1.3W

(direct drive)

8Ω (HS)

4Ω (LS)

QFN48L7

  • For new designs E523.06 is recommended
  • 16bit/48 MHzCPU assisted by 2 powerful co-processors
  • Library ROM for LIN-stack software update via LIN
  • Charge Pump Driver included
  • TJunc peak = +125°C
    (Contact supplier for higher temperature)
E523.06 (*SoC)
Field-Oriented DC Motor Controller with 16 Bit CPU
  • LIN 2.x (1.3 comp.),
    SAE-J2602 or
    PWM bidirectional
  • SPI for configuration
  • LIN Flash update
  • JTAG

7V to 28V (5V to 42V)

6x ±400mA

6x ±75mA

≈1.5kW (external FETs)
≈1.3W (direct drive)

8Ω (HS)
4Ω (LS)

QFN48L7

  • 16bit/48 MHzCPU assisted by 2 powerful co-processors
  • Library ROM for LIN-stack software update via LIN
  • Charge Pump Driver included
  • TJunc peak = +125°C
    (Contact supplier for higher temperature)
E523.30 (*SoC)
2x Full Bridge Controller (LIN / PWM Interface)
  • LIN 2.x (1.3) or SAE-J2602 or PWM bidirectional
  • LIN auto-addressing (slave mode position detection)
  • LIN Flash update for EoL and Service
  • JTAG

7V to 20V (5.5V to 42V)

-

2x ±75mA

≈25W
(per Motor)

225mΩ (HS)
275mΩ (LS)

QFN32L6

  • Drives 1 or 2 DC motors
  • 8bit CPU, 8k FLASH, 64Byte E2PROM
  • Current chopper motor control
  • Supply and read-out of up to 3, potentiometers or sensors
  • GPIO-pins
  • TJunc peak = +170°C
    (contact supplier for higher temperatures)
  • (*Plug & Play) - Demosoftware on request
E910.72 (*Driver IC)
6x Half-Bridge DC Motor with sensorless positioning
  • SPI™ for configuration

6V to 19V (40V)

-

540mA

≈7W
(1 Motor Mode)

1.25Ω

QFN32L5

  • Sensorless motor positioning
  • 3 independent pulse detectors
  • Excellent positioning performance
  • Drives 3 or 5 DC actuators
  • TJunc peak = +150°C
*Plug & PlayChip with defined functionality | no controller programming necessary
*SoCSystem-on-a-Chip | with integrated microcontroller
*SBCSystem-Basic-Chip | with Voltage Regulator Reset, Watchdog, physical Interface
*Driver ICDriver Chip without SBC or SoC features