Part-No. / Function Interface VSUPPLY IPEAK IMAX DC P(Motor) peak RDSON Package Comment
E523.05 (*SoC)
BLDC Motor Controller with 16bit CPU (LIN/PWM Interface)
  • LIN 2.x (1.3 comp.),
    SAE-J2602 or
    PWM bidirectional
  • SPI for expansion
  • LIN Flash update
  • JTAG

7V to 28V (5V to 42V)

6x ±400mA

6x ±75mA

≈1.5kW (external FETs)
≈3W (direct drive)

8Ω (HS)
4Ω (LS)

QFN48L7

  • For new designs E523.06 is recommended
  • 16bit / 48 MHzCPU assisted by 2 powerful co-processors
  • Library ROM for LIN-stack, software update via LIN
  • Software support on request
  • TJunc peak = +125°C (contact supplier for higher temperature)
E523.06 (*SoC)
Field-Oriented BLDC Motor Controller with 16 Bit CPU
  • LIN 2.x (1.3 comp.),
    SAE-J2602 or
    PWM bidirectional
  • SPI for expansion
  • LIN Flash update
  • JTAG

7V to 28V (5V to 42V)

6x ±400mA

6x ±75mA

≈1.5kW (external FETs)
≈3W (direct drive)

8Ω (HS)
4Ω (LS)

QFN48L7
LQFP48L7EP

  • 16bit / 48 MHzCPU assisted by 2 powerful co-processors
  • Library ROM for LIN-stack, software update via LIN
  • Software support on request
  • TJunc peak = +125°C (contact supplier for higher temperature)
  • *Plug & Play:
    Demosoftware for
    - sensorless HVAC fan,
       engine cooling fan
    - field oriented control (FOC)
       for pumps
E523.42
3 Phase Motor Controller
  • LIN 2.x (1.3 comp.) SAE-J2602 or PWM bidirectional
  • LIN Flash Update
  • JTAG

7V to 28V
(6V to 42V)

6x */- 1A

-

~14W

0.6 Ω (HS)
0.6 Ω (LS)

QFN32L5

  • 32bit / 24MHz ARM® Cortex®-M0
  • Library  ROM for LIN-stack software update via LIN
  • TJunc peak = +150°C
  • Software support on request
E523.52 (*SoC)
72V Brushless Motor Gate Driver with 16bit CPU
  • LIN Interface with external LIN transceiver
  • PWM Interface with external components
  • SPI for user expansion
  • LIN Flash update
  • JTAG

12V to 72V (7V to 76V)

6x ±500mA

6x ±50mA

≈1.5kW (external FETs)

10Ω (HS)
5Ω (LS)

QFN36L7

  • 16bit / 48 MHz CPU assisted by 2 powerful co-processors
  • Library  ROM for LIN-stack, software update via LIN (software support on request)
  • Standard HVAC fan firmware on request
  • TJunc peak = +125°C  (contact supplier for higher temperature)
  • *Plug & Play: Demosoftware on request